Constructive solution with photocatalytic activity (decontamination) for ultra-resistant asphalt pavements.
i.active CARGO is a cementitious mix based on the TX Active® technology and admixtures, specifically designed for achieving bituminous pavements with high mechanical performance and activated by photocatalysis, the product shows depolluting properties, helping to reduce the air pollution/contamination.
i.active CARGO is mixed with water, obtaining a self-percolating slurry, to fill open graded asphalts to obtain semi-rigid pavements.
Thanks to the special formulation of this smooth and high-flow grout, you can obtain
pavements with high punching shear resistance, through percolation in open graded asphalts where the interconnected void content varies from 18 to 22%, even up to 30%.
i.active CARGO can be easily pumped and percolated can penetrate the full layer depth of asphalt with a high void content without the need for mechanical vibration. No construction joints are required to control shrinkage. The combination "open graded asphalt + i.active CARGO" allows obtaining monolithic floors with the same characteristics and roading comfort as bituminous asphalt and, in addition, compressive strength of a concrete pavement, an ultraresistant pavement. It also provides high chemical resistance, e.g. to solvents and hydrocarbons.
i.active CARGO is particularly suitable, both in new job and in reparation, for:
- industrial flooring
- freight terminals (harbor/port, airports) and storage warehouses
- logistic platforms and areas
- parking areas for heavy vehicles
- access routes for freight vehicles
- maintenance, supermarket parking areas,
- street paving
- bus and tramway lanes and stops
- High occupation lanes
- toll gates
- corridors for military vehicles and service roads
- washing areas
- de-icing areas at airports
- road pavements in tunnels.
System features (porous asphalt + self-percolating slurry)
Compressive strength at 28 days: 8-12 MPa UNE-EN 13286-4:2003
Indirect tensile stress: >1.2 MPa UNE-EN 13286-41:2003
Elastic modulus at 20°C: 8000-12000 MPa UNE-EN 12697-26
Water/solid ratio: 34-38% (self-percolating slurry)
Average consumption: 10-12 kg/m2 for 4 cm thickness
Photocatalytic activity: >75% UNI 04-2010 (project)
About the above results, consult test conditions in the product data sheet. See document "FT i.active CARGO" in the download area.
|Nom UNSPSC||Roads and landscape|
|Uniclass 1.4 Code||L212|
|Uniclass 1.4 Description||Road/runway products|
|Uniclass 2.0 Code||SS-20-14-05|
|Uniclass 2.0 Description||Asphalt Road And Paving Systems|
|NBS Reference Code||20-14-05|
|NBS Reference Description||Asphalt Road And Paving Systems|
This product is available in:
Um Informationen bezüglich der Montagefirma zu erhalten registrieren Sie sich unter folgendem Link Link